This is a checklist for an HVAC, plumbing, or electrical shop that is leaving Housecall Pro. It covers the records to account for, when to cut over, what to tell the office, the techs, and the customers, and what to look at on the first morning. It is the list we walk through with a shop. It is not a tour of Housecall Pro's screens.
What to write down before you leave
Make this list while Housecall Pro is still the system the office opens every morning. Write it somewhere the office controls. A shared note is enough. A person should be able to check it after the move without guessing.
- Customers. Name, phone, email, and the service address. Flag two customers who share a name, and anyone who pays the bill at a different address from the work.
- Job history. The address, what you did, when, who went, and whether the job is still open. Open jobs matter more than closed ones. Finish them, or name the system that will close them.
- Estimates that are still open. Customer, the date you sent it, and whether they said yes. A sold estimate with no job yet is easy to lose in a move.
- Invoices. Number, customer, total, and what is still unpaid. Those unpaid amounts are the open balances. Take each balance from the invoice, not from memory.
- Prices you sell every week. The diagnostic, the repairs you do most, and the maintenance visit. The name on the list should be the name the tech already says in the driveway.
- Maintenance agreements and service plans. Who is on one, what it includes, when the next visit is, and how you bill it. A recurring visit that lives only in a reminder is easy to miss.
- Photos and attachments you would need if a customer called about old work. Permits, equipment labels, and the picture of a job you may have to stand behind.
Onboarding says we import supported customers, jobs, invoices and prices, review the matches, and flag records that need your attention. Why Trades Operator says we move your customers and past work for you, and you review what came across. Open estimates, maintenance agreements, and photos are on your list so you can check them. This page does not claim those come across on their own.
Once you are in, recurring invoices for maintenance plans, and service plan visits, are described on the why page. The list you wrote is what the office uses to set those up. The same page says the tech app shows today's jobs, notes, photos and equipment. Put the photos that still matter on the job. This page does not claim old Housecall Pro photos come across on their own.
Invoices that did come from Housecall Pro stay tied to that source. The invoice help says Change itemization is not offered on invoices imported from QuickBooks or Housecall Pro. Change those in the system they came from.
How the records come in
We import via Housecall Pro's API (requires the HCP MAX plan). That is the only path this page describes for Housecall Pro. Onboarding, why Trades Operator, and the Housecall Pro alternative use that same sentence.
This page does not describe a Housecall Pro CSV import. On the why page, spreadsheets and CSV files are their own path. They are not a second way to bring Housecall Pro in.
After the import, customers are matched so you do not get duplicates. Jobs and invoices stay with each customer. You review what came across before the office treats it as the record it will use. If a row is flagged, it needs a person. Do not clear a flag by typing the customer a second time.
Housecall Pro export data
People search for a Housecall Pro export because they want a file of their own. This page does not click through Housecall Pro's menus. We are not quoting a Housecall Pro help page for those clicks. Ask Housecall Pro what your own login can download. Save that file where the office controls it, and keep it. Use it to check the list above. It is your copy. It is not the path into Trades Operator.
The path into Trades Operator stays one sentence. We import via Housecall Pro's API (requires the HCP MAX plan). If the account is not on that plan, say so on the first call. Onboarding says the timing depends on getting access, and that we will tell you on that call.
When to cut over
Finish the work that is already on a truck, or pick one system to close it in. A job that is half in one place and half in the other is how an invoice gets sent twice.
Pick a slow week. Fewer installs, and a lighter on-call list, give the office time to check the list instead of fighting the schedule.
Keep working while we move you. That line is on onboarding. Use the overlap to look up the customers you wrote down. Do not enter the same new job in both systems. From the morning you choose, new work has one home.
The onboarding page says most shops are running the next day once we have access, and that larger histories or messy data can take a few extra days. It says we will tell you on the first call. That is a description of what we have seen, not a promise that every shop is done overnight.
The same page says that on day one the number forwards to Trades Operator, so every call is captured, and customers dial the number they already have. It also says the number then transfers, usually in one to three weeks, so texts and outgoing calls run through it too. You sign one form. The page says your number never goes dark.
What to tell the techs
Text them a link. They tap it. They are in. Onboarding says there is no training week. The why page says techs build estimates and take payment, and only what their role allows.
Send one note the afternoon before:
"New jobs go in Trades Operator starting tomorrow. If a customer is not on the job, call the office before you leave the driveway. Notes and photos go on the job. If you are not sure which system should close an old job, ask. Do not close it in both."
Name one person in the office who will answer that morning.
What to tell customers
You do not need a long announcement. The phone number they already use still reaches you, because it forwards on day one. Say that. Also say that a payment link may look different and is still your company.
A short text from the office is enough for customers with a visit that week:
"We are moving the office system this week. Your phone number stays the same. If we send a link to pay, it is still us. Call the office if a visit on your schedule looks wrong."
Do not ask a customer to pay an old invoice a second time. If they already paid in Housecall Pro, that payment stays with that invoice. The open-balance list is how the office avoids asking twice.
Payments and QuickBooks
Card payments in Trades Operator are set up by the company owner at Settings, then Money, then Customer payments. Payments go directly into your own business Stripe account. The steps are in Turn on card payments with Stripe. Until that setup shows payments on, an invoice can still be issued. The invoice help says that without card payments the invoice goes out without a payment link. Finish the owner's setup before you send a card link, or have the office record cash and checks the way that invoice page describes.
QuickBooks Online is connected from Settings, then Money, then QuickBooks. Only an owner or an administrator can connect it. When the status shows Connected, nothing in your books was moved or changed. That is the opening of Connect QuickBooks Online and bring in your records.
Read the update choices before the first sync. With Send to QuickBooks on, new invoices and payments you make in Trades Operator are also created in QuickBooks within about 10 minutes. Anything entered before you turned that on is not sent. The why page says you can run beside QuickBooks, or replace it once your opening balances reconcile. Pick that on purpose.
Sync now can bring in accounts, customers and vendors, Pricebook items, unpaid invoices, paid history, and estimates from QuickBooks. Those estimates come in read-only, so they match QuickBooks to the cent. QuickBooks records dated before your Trades Operator books start stay as history. Your opening balances carry their amounts. If the same customer and the same invoice already exist, because you typed them or because they arrived from Housecall Pro and from QuickBooks, stop and look. Do not add a second invoice to make the list look complete.
Run one customer, one invoice, one payment, and one refund, then look in QuickBooks. The printable list is the QuickBooks sync test.
A payment still processing in Housecall Pro on cutover morning belongs on the open-balance list, with a note. Do not record it again in Trades Operator until you know it settled, and do not record it in both places.
Day-one checklist
Do this the morning the office starts in Trades Operator. One person reads the list. Another person clicks.
- Find three customers you wrote down: one with an open job, one with an unpaid invoice, and one you have not seen in a year.
- Open the unpaid invoice and compare the balance with the number you wrote down.
- Search a price you sell every week and see whether the name is the one the tech expects.
- Have one tech open today's jobs from the link you sent.
- Call the company number from a phone that is not the office phone. Confirm it reaches you.
- If you use QuickBooks, confirm the status says Connected, and confirm whether Send to QuickBooks is on. Work you entered before that switch should not have been sent.
- Look at anything we flagged. Fix it with the office. Do not retype the customer to get past the flag.
- Enter that day's new jobs in one system only.
- Check the maintenance list for any visit due this week, and put that visit on the schedule if it is not there yet.
If a row is wrong, write down what you expected and what you see. That note is more useful than bringing the same file in again.
Talk with us
If you want us to walk through this list with your shop, write to hello@tradesoperator.com or book a demo.
FAQ
How do we switch from Housecall Pro?
Write down the records in the list above, pick a slow week, and finish or assign the open jobs. We import via Housecall Pro's API (requires the HCP MAX plan). Onboarding is where we look at the shop together and plan the move.
How does Housecall Pro data get into Trades Operator?
We import via Housecall Pro's API (requires the HCP MAX plan). The import covers supported customers, jobs, invoices and prices. We review the matches and flag records that need your attention.
Where do we get a Housecall Pro export?
Ask Housecall Pro what your own login can download, and keep that file. This page does not document their export menus. That file is your copy. It is not how records come into Trades Operator.
What should we check on the first day?
Find a known customer, an open job, an unpaid invoice, and a price you sell every week. Call the company number. Confirm QuickBooks only if you use it. Enter new work in one system.
Will QuickBooks change when we connect it?
Connecting shows Connected, and nothing in your books was moved or changed. New invoices and payments go to QuickBooks only after an owner turns Send to QuickBooks on. Work entered before that is not sent. The steps are in the QuickBooks help.