Home Free tools Hourly rate calculator

Free tool

What should you charge per hour?

A break-even billable rate and a trip charge for an HVAC, plumbing, or electrical shop. Wage, employer payroll tax, and the truck's per-mile cost start from public sources. Billable hours, overhead, and the profit you want do not, because no public figure for them held up. You enter those. The result is a cost, not a price a customer has agreed to pay. Local markets differ. The math stays in this browser.

Your costs, their published rates

The wage buttons, the benefits percent, paid hours, and the per-mile cost start filled in. Everything else starts empty on purpose. A blank line is left out of the math, and the result says so. Blank is not zero.

Technician base wage

National median hourly wage, May 2025, from the Bureau of Labor Statistics Occupational Employment and Wage Statistics, Table 1, last modified May 15, 2026. The mean is shown beside the median and is not what the button fills in. These are employee wages, not a billable rate. Replace the number with the wage you actually pay.

If you are the technician, type the pay this work has to replace. Federal income tax withheld from a paycheck is the employee's, so it is not an employer cost here. A sole proprietor's self-employment tax is a different calculation, and this page does not do it.

Benefits as a percent of wages

34.5% is paid leave, supplemental pay, insurance, and retirement for private-industry installation, maintenance, and repair occupations, divided by wages. Bureau of Labor Statistics Employer Costs for Employee Compensation, June 2026, Table 4, released September 9, 2026. The arithmetic is ($3.29 + $1.89 + $4.27 + $2.15) / $33.61. Legally required benefits, $3.81 an hour, are left out of the 34.5% because payroll taxes and workers' comp are their own lines. The average includes large employers. A small shop often pays less. Set this to 0 if you offer none of these.

%

No national default. Your state notice has a rate and a wage base. Multiply them and type the dollars. Leave it blank if you do not have the notice yet.

No national default. Insurers quote a rate for your state and class code. $8.00 per $100 of wages is 8% of wages. That is an illustration of the unit, not a rate to use. Leave the field blank until you have your own.

No public count we could confirm, so this starts empty. Billable hours are hours you can invoice. Drive time you do not bill, callbacks, training, and shop time are paid and are not in this box. The result table shows the rate at 900, 1,200, 1,500, and 1,800 hours. Those are checkpoints, not a recommended year.

The count the truck cost and the overhead are spread across. A one-person shop types 1. Leave it blank and those two costs stay out of the rate.

$1.10 is AAA's 2026 cost per mile for a half-ton pickup, personal use, over five years and 75,000 miles. Commercial insurance, racks, and upfitting are not in that figure. Type your own cost per mile if you know it. Miles per year have no default.

No public default. Rent, shop insurance, software, phones, marketing, office pay, licenses, and the owner's pay for hours that are not billed as technician time. The checklist further down is the list. Do not also put the technician's wage or the truck's per-mile cost here. Those are already separate lines.

No published margin is used. This is profit after the costs above, as a share of the price. 20% margin is not 20% markup. Leave it blank to stop at break-even.

Minutes you pay the technician for and do not already bill as job time. No public default for either field.

The wage is the small part

A billable rate starts from what you pay, then adds what the hour costs you after the technician has gone home. The May 2025 medians below are a stand-in for the wage box. They are not the rate.

National figures, Occupational Employment and Wage Statistics, May 2025, Table 1. Last modified May 15, 2026. Mean annual pay is the published mean, not the median times 2,080.
OccupationEmploymentMean hourlyMean annualMedian hourly
Heating, air conditioning, and refrigeration mechanics and installers409,670$31.14$64,780$29.33
Plumbers, pipefitters, and steamfitters465,840$34.70$72,170$30.67
Electricians757,220$34.37$71,490$30.38

Employer Social Security is 6.2% of wages up to the 2026 wage base of $184,500. Employer Medicare is 1.45% of all wages. Together that is 7.65% until the wage base, and 1.45% after it. The additional 0.9% Medicare tax on high wages has no employer match, so it is not in this cost. Federal unemployment is 0.6% of the first $7,000, which is $42 when the full state credit applies. Publication 15 (2026) tells employers to deposit federal unemployment at 0.6% and to stop at $7,000. The $42 is that rate times that base.

Benefits in the June 2026 compensation release are easy to misread. For this occupation group in private industry, total compensation is $49.01 an hour. Wages are $33.61, which is 68.6%. Total benefits are $15.41, which is 31.4% of compensation. That 31.4% includes $3.81 of legally required benefits. This calculator needs a percent of wages, and it adds legally required taxes on their own lines. ($15.41 − $3.81) is $11.60. $11.60 / $33.61 is 34.5% of wages, rounded to a tenth of a percent. Putting 31.4% in the benefits box would mix the two denominators and would count payroll taxes twice.

Private industry, installation, maintenance, and repair occupations. Employer Costs for Employee Compensation, June 2026, Table 4. Released September 9, 2026.
PiecePer hourIn the 34.5%?
Wages and salaries$33.61The denominator
Paid leave$3.29Yes
Supplemental pay$1.89Yes
Insurance$4.27Yes
Retirement and savings$2.15Yes
Legally required benefits$3.81No. Taxes and workers' comp are separate lines.

The occupation group is wider than HVAC, plumbing, and electrical. It includes other installation and repair work. Inside goods-producing industries the same group is higher: $52.79 an hour total and $34.85 in wages, on the same table. The 34.5% uses the all-industry row, not that subset. Small shops are inside the average and so are large employers. If your health plan and retirement are thinner than that average, move the slider down. Zero is allowed.

Paid hours and billable hours are different

The loaded cost of a paid hour is the year's wages, taxes, and benefits, divided by paid hours. The billable rate divides that same year by the hours you can invoice. If you pay 2,080 hours and bill 1,200, every billed hour has to carry 2,080 / 1,200 of the paid-hour cost before the truck and the overhead.

There is no billable-hour figure on this page from a statistical agency. Forum threads and vendor guides quote counts. They are not a census, and they are not filled in here. The checkpoints at 900, 1,200, 1,500, and 1,800 hours exist so you can see the swing. Your own completed-job hours beat any of them.

Drive time you do not bill belongs in the gap between paid and billable, or in the trip charge. Putting it in both, and also spreading every truck mile across the hourly rate, counts the same drive more than once. The trip section says which combination does that.

What the truck costs per mile

AAA's Your Driving Costs 2026 fact sheet puts a half-ton pickup at $1.10 a mile, the highest of the seven categories in the study. The news release is September 15, 2026. The figure is an average over five years and 75,000 miles of personal use. Insurance in the study is a full-coverage personal policy for a driver under 65, with more than six years of experience, no accidents, living in a suburb or a city. Fuel in the study uses a 12-month average ending May 2026.

That is a useful published cost, and it is not a service truck. Commercial insurance, a rack, a cap, and upfitting are extra. An older paid-off truck can be less. Type your own cost per mile when you have one: a year of fuel, insurance, payment or depreciation, tires, and repairs, divided by the miles you drove.

The fact sheet does not print a single annual dollar cost for the half-ton pickup. This page does not invent one. Miles per year stay blank until you enter them. AAA's category average is built on 75,000 miles over five years. That assumption is theirs. It is not a default mileage for a shop.

The IRS business standard mileage rate is 72.5 cents a mile from January 1 through June 30, 2026, and 76 cents from July 1 through December 31, 2026. It is a reimbursement rate for business use of a car, van, pickup, or panel truck. It is not a measurement of what your truck costs, and the calculator does not use it as the default.

Overhead is a list you add up

No public overhead total for these trades checked out, so the field starts empty. Add a year of the costs that are not already in the wage, the payroll taxes, the benefits percent, or the per-mile truck cost.

  • Shop rent or the portion of a home you can support as the shop.
  • Shop insurance, and vehicle insurance if you left it out of the per-mile cost.
  • Software, phones, and internet.
  • Marketing.
  • Office wages, and the owner's pay for hours that are not billed as technician time.
  • Accounting, payroll service, licenses, permits, tools, uniforms, and utilities.

The sheet is blank on purpose. Fill the amounts, add the column, and type the total. It is not uploaded.

Download the overhead worksheet (CSV)

A trip charge is drive time, and maybe miles

The time portion is the drive in hours times the loaded cost of a paid hour, plus the same fraction of overhead per billable hour when overhead is in the form. It uses the paid-hour cost, not the billable rate. The billable rate has already grossed the paid hours up. Using it again on the drive would load the drive with non-billable time a second time.

The mile portion is miles on that call times the cost per mile. Use it when the trip fee is how you recover the drive. Leave it off the invoice when the hourly rate already includes the year's miles. Charging both counts the miles twice. The result says so when both are present.

Say the visit fee before the truck rolls, in one sentence: the amount, what it covers, and whether you credit it if they hire you to do the repair. The amount is the one from your own inputs. This page does not have a national trip fee to read to them.

Markup and margin are not the same percent

Margin is profit divided by the price. Markup is profit divided by the cost. The calculator's target is a margin. The line under the price translates it into markup so the two do not get typed into the wrong box.

Arithmetic only. A 50% markup is one third of the price, exactly. These rows are not a recommended markup.
Markup on costMargin on price
25%20%
50%1/3
100%50%

A price at a chosen margin is the break-even rate divided by (1 − the margin). A margin of 100% is not a usable target. The cost would have to be zero.

Flat rate or time, as a judgment

This section is a judgment, not a measurement. It has no statistics in it.

Time and materials bills the hour. It fits work whose length you cannot see until you open the equipment. The risk is an hour that runs long for the customer, or a short visit whose real cost was the drive.

A flat price, or a flat diagnostic, bills the job. It fits work you have done enough times to know the hours. The risk is a job that runs long, which comes out of the margin you typed.

A trip or diagnostic fee, then time or a flat price for the repair, is a way to say the drive out loud. Whether you charge it, credit it against the repair, or fold it into the hourly rate is a choice about how the customer hears the same cost. The calculator prices the cost. It does not know which way your market will accept it.

A worked example

Illustrative numbers

The wage, the 34.5% benefits rate, the 2,080 paid hours, and $1.10 a mile are the sourced figures. Everything else in this box is made up so the arithmetic is visible. It is not a suggested rate, and it is not what the form does when you first open the page. The live form starts from the HVAC median and leaves billable hours, overhead, taxes that vary by state, and the trip blank.

Illustrative numbers. Made-up cells are marked. The outputs are this page's formula, rounded to the cent.
InputFigureStatus
Wage$30.67 an hourBLS plumber median, May 2025
Paid hours2,08040 × 52
Benefits34.5% of wagesBLS, June 2026, rounded
State unemployment$400 a yearMade up
Workers' comp$8.00 per $100 of wagesMade up
Billable hours1,200Made up
Technicians and trucks1 and 1Made up
Miles15,000Made up
Cost per mile$1.10AAA half-ton pickup, 2026
Overhead$48,000Made up
Target margin15%Made up
Drive25 minutes and 10 milesMade up

Wages for the year are $30.67 × 2,080 = $63,793.60. Employer Social Security is $3,955.20. Medicare is $925.01. Federal unemployment is $42.00. Benefits at 34.5% are $22,008.79. State unemployment is the made-up $400.00. Workers' comp at $8 per $100 is $5,103.49. The loaded year is $96,228.09, which is $46.26 for one paid hour.

Spread over 1,200 billable hours, labor is $80.19. The truck at 15,000 × $1.10 is $16,500, or $13.75 a billable hour. Overhead is $48,000, or $40.00 a billable hour. The break-even billable rate is $133.94. At a 15% margin the price is $157.58, which is a 17.65% markup on the break-even cost.

The same year at the checkpoints: $178.58 break-even at 900 billable hours, $133.94 at 1,200, $107.15 at 1,500, and $89.30 at 1,800. The price at 15% margin moves with them: $210.09, $157.58, $126.06, and $105.06. The hours are still made up. The movement is the point.

The trip, using the loaded paid hour and a slice of the $40 overhead, is $35.95 for 25 minutes. Adding 10 × $1.10 makes $46.95. In this example the hourly rate already includes the year's miles, so the $11.00 of miles in the trip is a second count if you charge both.

Sources and method

Money is calculated in cents. Each tax line is rounded to the nearest cent. A displayed hourly rate is the annual cents divided by the hours, rounded to the nearest cent. Percent means basis points in the code: 34.5% is 3,450 / 10,000.

annual wages = wage per hour × paid hours
employer Social Security = 6.2% × wages up to $184,500
employer Medicare = 1.45% × all wages
federal unemployment = 0.6% × wages up to $7,000
benefits = benefits percent × annual wages
workers' comp = (dollars per $100) / 100 × annual wages

loaded cost of a paid hour = (wages + Social Security + Medicare + federal unemployment + benefits + state unemployment + workers' comp) / paid hours
labor per billable hour = that loaded year / billable hours
truck per billable hour = trucks × miles per truck × cost per mile / (technicians × billable hours)
overhead per billable hour = annual overhead / (technicians × billable hours)
break-even rate = labor + truck + overhead
price at a margin = break-even / (1 − margin)
markup = price / break-even − 1

trip, time only = (drive minutes / 60) × loaded paid-hour cost + the same fraction of overhead per billable hour
trip, with miles = time only + miles on the call × cost per mile

What the formula leaves out until you type it

  • State unemployment, workers' comp, billable hours, overhead, trucks, miles, a target margin, and the drive. Blank stays out. It is not stored as zero.
  • Self-employment tax. The tax lines are the employer share for a W-2 employee.
  • Federal income tax withholding. That money is the employee's.
  • The additional 0.9% Medicare tax. Employers withhold it in some cases and do not match it.
  • An annual dollar cost for a half-ton pickup. AAA publishes $1.10 a mile and does not print that annual total on the fact sheet we read.
  • Any typical markup, margin, or billable-hour count. The markup table is arithmetic. The hour checkpoints are arithmetic.

The sources, opened for this page

  1. Table 1. National employment and wage data from the Occupational Employment and Wage Statistics survey by occupation, May 2025. U.S. Bureau of Labor Statistics. Last modified May 15, 2026. Read November 6, 2026. HVAC median hourly $29.33, mean hourly $31.14, mean annual $64,780, employment 409,670. Plumbers, pipefitters, and steamfitters median $30.67, mean hourly $34.70, mean annual $72,170, employment 465,840. Electricians median $30.38, mean hourly $34.37, mean annual $71,490, employment 757,220.
  2. Employer Costs for Employee Compensation, June 2026. U.S. Bureau of Labor Statistics. For release 10:00 a.m. ET, Wednesday, September 9, 2026, USDL-26-1494. Table 4, private industry, installation, maintenance, and repair occupations. Read November 6, 2026. Total compensation $49.01, wages $33.61, total benefits $15.41, paid leave $3.29, supplemental pay $1.89, insurance $4.27, retirement $2.15, legally required benefits $3.81. The goods-producing subset of the same occupation group is $52.79 total and $34.85 in wages.
  3. Topic no. 751, Social Security and Medicare withholding rates. Internal Revenue Service. Page last reviewed or updated September 24, 2026. Read November 6, 2026. Employer and employee Social Security 6.2% each. Medicare 1.45% each. For earnings in 2026 the Social Security wage base is $184,500. Medicare has no wage base. Additional Medicare tax of 0.9% has no employer match.
  4. Publication 15 (2026), Employer's Tax Guide (PDF). Internal Revenue Service. Catalog number 10000W, December 15, 2025. Read November 6, 2026. Social Security tax 6.2% and wage base $184,500. Federal unemployment deposit calculated at 0.6%, stopping when taxable wages reach $7,000 for the year. The publication says the amount may need adjustment for the state-unemployment credit and points to the Form 940 instructions.
  5. Publication 15-A (2026), Employer's Supplemental Tax Guide. Internal Revenue Service. Read November 6, 2026. For 2026, the Social Security wage base limit is $184,500 and the FUTA tax wage base limit is $7,000.
  6. FUTA credit reduction. Internal Revenue Service. Read November 6, 2026. The standard FUTA tax rate is 6.0% on the first $7,000. A credit of up to 5.4% leaves a net rate of 0.6%. A credit-reduction state pays more. The Department of Labor announces credit-reduction states after November 10. This page does not name states.
  7. Your Driving Costs 2026 (PDF). AAA. Fact sheet dated with the September 15, 2026 news release. Read November 6, 2026. Half-ton pickup $1.10 a mile. Personal-use full-coverage insurance, five years and 75,000 miles. The release's average new-vehicle cost of $12,863 is the study average, not the half-ton pickup.
  8. Standard mileage rates. Internal Revenue Service. Read November 6, 2026. Business rate 72.5 cents a mile for January 1 through June 30, 2026 (the page cites IR-2025-128) and 76 cents for July 1 through December 31, 2026 (the page cites IR-2026-29). Used here only as a reimbursement rate, not as the truck default.

Questions

Do you keep the numbers I type here?

The calculator runs in your browser. Nothing you type is sent to us.

Is the result the price I should charge?

The result is a break-even rate from the costs in the form, and a higher rate if you enter a target margin. It is a method. It is not a survey of prices, and local markets differ.

What is the difference between markup and margin?

Markup is the amount you add, divided by cost. Margin is the same amount divided by the price. A 25% markup is a 20% margin. A 50% markup is a margin of one third. A 100% markup is a 50% margin.

Trades Operator makes field service software for HVAC, plumbing and electrical shops. The calculators on the free tools page are unchanged.